EN 
ES_ES 
DE 
RENT
OF EQUIPMENT
SERVICE OF
LABORATORY
We have a complete laboratory for calibration and repair of test instruments with which we provide after-sales support.
SF6 Gas Analysis
GA 11 - Gas Quality Analyzer SF6
- Indication of SF6 volume percentage.
- Indication of humidity concentration ppmv and ppmm and dew point in °C or °F.
- Indication of SO2 concentration in ppmv.
- Indication of inlet pressure in Bar pa or pe, psi, Kpa, Mpa.
- Automatic identification of the residual life time of the sensors.
GIR 10 - SF6 Gas Detector
- Detection of trace concentrations down to 0.6 ppmv
- It reacts exclusively in the presence of SF6 gas and is therefore insensitive to moisture and volatile organic compounds (VOC).
- Easy handling
- Fast response time
- Factory calibration with certified test gases
GVC 10 - Portable Vacuum Compressor for SF6 Gas Removal
- Extraction to residual pressure
- Free of oils and lubricants
- Very high watertightness.
- Cleaning and filtering of SF6 during the filling process.
- Cold operation in continuous operation.
GTU 10 - Portable SF6 Gas Transfer Unit
- SF6 gas recovery from SF6 insulated equipment.
- Cleaning and filtering of SF6 during the recovery process.
- SF6 filling by positive pressure.
- Cleaning and filtering of SF6 during the filling process.
- Cylinder Consolidation.
- DN8 coupling kit.
GVP 10 - Portable Vacuum Pump for SF6 Gas Cell Fill Preparation
For evacuation of air or nitrogen for preparation of SF6 gas cell filling.
- Pumping capacity up to 10 m³/h.
- Reachable final pressure ≤ 0.02 mbar abs.
- Low weight and compact design.
- Built-in oil backflow preventer and oil mist feedback.
- Optional precision vacuum gauge.
GPF 10 - Portable SF6 Gas Filter Unit
Module for the maintenance of SF6 gas filling equipment and treatment of contaminated SF6 gas.
- A filter element for particulate matter, moisture and decomposition products
- Easy replacement
- High gas throughput through flow optimization
- Robust and reliable sealing construction
- Corrosion protection through the anodized filter housing
HC150 - Trolley for SF6 Recovery and Maintenance
- Dual vacuum pump with a capacity of 34 m3/h, with a final pressure of less than 1mbar.
- Compressor for SF6 1m3/h
- Manual valve sets that allow changing the operating mode of the equipment
- Tank for storage of SF6 in liquid state with a capacity of 68 Kgs.
- 89.9 % resilience
- Filter for drying
Transportation at customer's expense
SF6 Gas Filling Kit
This device allows to fill an equipment directly from a SF6 gas cylinder by pressure difference. It has a pressure gauge indicating the pressure in the cylinder, then a manually adjustable pressure reducer and a secondary 10 Bar scale pressure gauge indicating the compartment pressure.
973-SF6 Gas Quality Analyzer SF6
The RH Systems Model 973-SF6 analyzer was specifically designed to measure the moisture and purity of SF 6 in gas insulated cell systems. Moisture measurement data is displayed in ppmv, ppmw and dew/frost point at system pressure or standard pressure. Purity measurement is displayed directly in% SF 6 volume. Both moisture and purity measurements use accurate and reliable condensation techniques.
SERVICES / Rental / SF6 gas analysis
SF6 GAS ANALYSIS
Specialized equipment for SF6 gas analysis to ensure the efficiency and safety of your electrical systems. We have advanced equipment to measure purity, detect leaks and perform accurate tests, all at your disposal when you need it.
WIKA
SF6 ACOPLES
We offer SF6 connectors and hoses in various sizes and materials, ensuring safety and protection for assets and operators.
SYNECOM
SF6 PLANT
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
ENERVAC
CRYOQUIP
HC 150
Cryoquip's HC 150 is a vacuum compressor designed to efficiently and safely recover and compress SF6 gas in electrical equipment.