EN 
ES_ES 
DE 
RENT
OF EQUIPMENT
SERVICE OF
LABORATORY
We have a complete laboratory for calibration and repair of test instruments with which we provide after-sales support.
Measurement, Analysis and Certification Instrumentation
MI 2088 /50 - TELUROMETER Earth, Continuity and Insulation Tester
- Insulation resistance measurement with DC voltage.
- Continuity of PE conductors with 200mA test current and polarity change.
- Continuity of PE conductors with a test current of 7 mA (continuous measurement) with difference trip.
- Tension.
- Earth resistance (4-wire method, one clamp or two clamps).
- Specific earth resistance.
- TRMS leakage and load currents (optional with clamps).
- Testing of surge protection devices.
MI 3123 - Earth Resistance & Resistivity Meter
- Insulation resistance measurement, continuity of protection conductors.
- Grounding resistance (four-prong method), Soil resistivity measurement.
- Loop fault impedance and RCD-loop resistance, Line impedance.
- RCD-Contact voltage, RCD-Time-delay, RCD-Trip current, RCD-Ground resistance.
- Phase rotation, Fuse, Fault, Tracing conductor, Locator, High resolution in loop impedance (mΩ)
MI 3105 - EurotestXA - Multifunction Tester for Electrical Installations
- Isolation Resistance with DC voltage.
- Continuity of PE conductors with a test current of 200 mA and change of polarity.
- Continuity of PE conductors with a test current of 7 mA (continuous measurement) without differential tripping.
- Line and loop impedance.
- Loop impedance with differential block function.
- TRMS voltage and frequency.
- Sequence of phases.
- Checking of differentials (general and selective AC and A type)
- Ground resistance (3-wire method).
- Testing of insulation monitoring devices (IMD).
- First fault leakage current in IT systems.
MI 3121 - SmarTEC - Isolation / Continuity
- Insulation resistance with DC voltage.
- Continuity of PE conductors with a test current of 200 mA and change of polarity.
- Continuity of PE conductors with a test current of 7 mA (continuous measurement) without differential tripping.
- TRMS voltage and frequency.
MI 3201 - TeraOhm 5kV Plus HV Isolation Tester
- Test Voltage 0v .... 5500v
- Insulation measurements up to 10 TW
- DAR Dielectric Absorption Radius
- PI Polarization Index
- DD Dielectric Discharge
- Insulation leakage current
MI 3210 - Insulation Tester 10KV
The MI 3210 TeraOhmXA 10 kV is a hand-held instrument, powered by
battery or from the mains with an excellent IP protection rating (IP 65),
intended for the diagnosis of insulation resistance using high
DC test voltage up to 10 kV. Due to its ruggedness (CAT IV protection)
and high immunity to radiated RF fields. It is the most suitable for use
industrial.MEASUREMENT FUNCTIONS:
- Insulation measurement
- Diagnostic test (PI, DAR DD)
- Step stress test
- Dielectric Test (DC) up to 10 KV
- Frequency and voltage measurement up to 550 V TRMS
MI 3280 - Digital Transformer Analyzer
It is a multifunction, portable, battery-powered (Lithium Ion) tester with an excellent IP protection rating: IP65 (closed case), IP54 (open case), designed for the diagnosis of: transformer ratio, phase deviation and excitation current of single-phase and three-phase transformers and winding resistance of single-phase and three-phase transformers.
MEASUREMENT FUNCTIONS:
- Measurement of the transformation ratio of single-phase transformers;
- Phase deviation between high voltage and low voltage winding
- Excitation current when measuring the transformation ratio
- Measurement of the transformation ratio of three-phase transformers:
- Phase deviation between high voltage and low voltage winding
- Excitation current when measuring the transformation ratio;
- Measurement of winding resistance of single-phase transformers;
- Measurement of winding resistance of single-phase transformers;
MI 3290 - High Frequency Telurometer
Designed to measure the ground resistance, specific ground resistance and ground potential of different powered and unpowered objects. The user can choose between different methods from the classical 3-wire earth resistance measurement to the single or four clamp method for measuring electrical towers. It has the option to measure with different frequency methods: single frequency or frequency sweep from 55 Hz to 15 kHz, HF method with 25 kHz and pulse method simulating lightning discharge. Its high immunity to electrical noise makes this instrument the most suitable for industrial environments.
MI 3252 - 100 A Micrometer, Low Resistance Tester
Portable low resistance meter (ohmmeter) used to measure low contact resistances of circuit breakers, switches and busbar connections using a test current of 100 mA to 100A.
MEASUREMENT FUNCTIONS:
- Resistance measurement with adjustable test current (100 mA ... 100 A).
- Voltage drop measurement.
MI 3250 - 10A Micrometer, Low Resistance Tester
Portable low resistance tester used to measure low contact resistances of circuit breakers, switches and busbar connections using a test current up to 10A.
MEASUREMENT FUNCTIONS:
- Bidirectional resistance measurement from 0.1 to 1000 ohm with current test up to 10 A.
- Temperature compensation (with optional temperature probe)
MI 3295 - Step and Contact Voltage Meter
Step and touch voltage measurement:
- Earth resistance measurement with 1mΩ resolution.
- Soil resistivity measurement.
- Test current: 55A Max.
- Test Voltage: less than 55v.
- Test frequency: 55Hz.
MI 2892 POWER MASTER - Power Quality Analyzer
- Voltage: TRMS, peak, crest factor (4 channels).
- Current: TRMS, peak, crest factor (4 channels).
- Power (active, reactive, apparent).
- Power measurements according to IEEEE 1459 (active, non-active, fundamental, harmonics, load unbalance).
- Unbalance, flicker measurement (50 Hz).
- Harmonic analysis up to the 50th harmonic, THD measurement.
- Energy (active, reactive, generated, consumed).
- Capture and recording of power supply events (disconnections, interruptions, surges, outages).
- Monitoring and recording of starting currents.
- Presentation, snapshotting and recording of waveforms.
- Transient overvoltage recording.
- Power quality analysis according to EN 50160.
- Logging of up to 10 adjustable alarms.
- Temperature measurement.
MI 2592 POWER Q4 - Power Quality Analyzer
- Voltage: TRMS, peak, crest factor (4 channels).
- Current: TRMS, peak, crest factor (4-channel).
- Power (active, reactive, apparent).
- Power factor, cosφ.
- Imbalance, flicker measurement.
- Harmonic analysis up to the 50th harmonic, THD measurement.
- Energy (active, reactive, generated, consumed).
- Capture and recording of power supply events (disconnections, interruptions, surges, outages).
- Monitoring and recording of inrush currents.
- Waveform snapshot capture display.
- Power quality analysis according to EN 50160.
- Logging of up to 10 alarms.
- Temperature measurement.
ISOSCAN® EDS3090 - Insulation fault location
- The EDS30 is a portable fault evaluation system for insulation fault location in isolated earthed systems (IT system). All components are enclosed in a metal case.
TEKON 950 - Battery Analyzer
The TEKON950 battery quality analyzer allows the user to diagnose and evaluate the performance and degree of aging by testing the condition of individual batteries (500 V max.) in cell, module or pack type. in ground isolated systems (IT system). All components are included in a case.
SERVICES / Rental / Measurement, analysis and certification instrumentation
INSTRUMENTATION OF MEASURES ANALYSIS AND CERTIFICATION
Explore our rental catalog of measurement, analysis and certification instrumentation equipment. We offer accurate and reliable solutions to ensure quality and regulatory compliance in a variety of industrial applications.